Tanishk Primx Cement Primer

Tanishk Primx Cement Primer

Application Method
Brush, Roller or Spray
Dilution
Water
Shades
White
Packaging
1Ltr., 4Ltr., 10Ltr., 20Ltr.

Tanishk Primx Cement Primer

By Arosun Paints
(5 Star Rating)
Arosun Paints Tanishk Primx interior and exterior cement primer has been manufactured for above grade masonry surfaces where high performance primer is needed. It is efflorescence and alkali resistant and will increase and reinforce the performance of the paints.
Features:
Finish Matt Finish
Durability High upto 4 Years
Washability Good
Coverage 145-155 Sq.Ft. per Ltr./coat
Drying Time 4-6 Hours
Techincal Specifications

Method of Application Brush, Roller, Spray
Dilution Water Ratio 400-500ml. Per Ltr.
Drying Time Surface dry 60-90 minutes / Hard dry 24-48 Hrs
Re-Coating Time At an interval of 2-4 Hrs
Coating System 2-3 Coats as required
Shade Milky White
Packaging 20ltr, 10ltr, 4ltr & 1ltr.

Additional Info

FINISH/MATT: Highly Durable

APPLICATION: Apply a coat of AROSUN PRIMX Cement Primer (water thinnable). For best results, fill up dents with suitable AROSUN PAINT’S Wall Charizma Wall Putty applied in thin layers. Wherever application of spot putty or full putty is resorted to, a coat of AROSUN PRIMX Cement Primer-water thinnable is recommended as an undercoat on top of the putty for eliminating the patchy appearance in final coats. AROSUN Distemper is supplied as a thick paste, and water is to be added slowly to the paste while stirring to obtain brushing consistency.

Normally 500-600 ml of water is required for 1 kg of distemper. However, the amount of water needed will depend upon the porosity and texture of the substrate. Apply 2-3 coats by brushing, keeping an inter-coat interval of about 4 hours between successive coats.Shades of your own choice can also be made by tinting it with Universal Stainer. The tinting process must be carried out before thinning.