Performance of Acrylic Distemper critically depends on surface preparation and application as outlined below:

Arosun Paints New surfaces :

Ensure that all dust, dirt and foreign matter are scraped and brushed away. Also ensure the surfaces are free from salts, oil, grease and ridges. For better result apply two coats of Arosuns Wall Carshima Wall Putty followed by Arosuns Water Primer (Primx) then Acrylic Distemper.

Old surfaces :

Before applying to old surfaces, ensure the substrate is firm. First wash down the surface with a sugar soap solution, rinse and allow to dry before repairing n applying the primer.

Spreading Capacity :

• Sparsh:8-9 Sq. metre per kg in double coats*
• Khushi:5-6 Sq. metre per kg in double coats*

Surface Preparation:

New plaster surfaces to be painted should be allowed to mature at least for a period of six months. Remove loose matter at least for a period of six months. Remove loose particles on plaster and rub lightly with sandpaper. Previous coatings of lime wash, colour wash and powder distemper must be scraped off. In case of repainting, earlier coating of oil-bound distemper or emulsion based paints need not be removed if in sound condition. However, the sheen of such coatings must be removed by sanding. AROSUN Acrylic Distemper will not be suitable for walls previously painted with oil-based paints, glossy, semi glossy, lustrous, etc., until the previous coatings are thoroughly scraped off. Wherever Primx Cement Primer water thinnable is used, overnight drying and then proper sanding are recommended before finish coat of AROSUN Acrylic Distemper.