Primx Cement Primer

PRIMX is a 100% acrylic emulsion based paint especially formulated for super performance when applied properly on exterior/interior walls due to its unique water resistant property and resistance property against fungi, algae, dampness caused by lashing rain. Presence of light, fast chemical resistant pigments / fillers, tough and flexible emulsion resin binder, special preservatives and other special additives make it an excellent durable coating.

FINISH/MATT : Highly Durable

Exterior has been manufacturer for above grade masony surfaces where a high performance primer is needed. It is efflorescence and alkali resistant and will increase and reinforce the performance of the paints. It can be used on properly prepared concrete, concrete block, brick and stucco. Exterior primer is also designed for use on exterior word and plywood siding and trim. It can be used for priming new or previously painted walls, ceiling & wooden surfaces.


Apply a coat of AROSUN PRIMX Cement Primer (water thinnable). For best results, fill up dents with suitable AROSUN PAINT’S Wall Charizma Wall Putty applied in thin layers. Wherever application of spot putty or full putty is resorted to, a coat of AROSUN PRIMX Cement Primer-water thinnable is recommended as an undercoat on top of the putty for eliminating the patchy appearance in final coats. AROSUN Distemper is supplied as a thick paste, and water is to be added slowly to the paste while stirring to obtain brushing consistency.

Normally 500-600 ml of water is required for 1 kg of distemper. However, the amount of water needed will depend upon the porosity and texture of the substrate. Apply 2-3 coats by brushing, keeping an inter-coat interval of about 4 hours between successive coats.Shades of your own choice can also be made by tinting it with Universal Stainer. The tinting process must be carried out before thinning.

Method of Application Brush, Roller, Spray
Dilution Water Ratio 400-500ml. Per Ltr.
Drying Time Surface dry 60-90 minutes / Hard dry 24-48 Hrs
Re-Coating Time At an interval of 2-4 Hrs
Coating System 2-3 Coats as required
Shade Milky White
Packaging 20ltr, 10ltr, 4ltr & 1ltr.